Quantcast
Channel: VMware Communities : All Content - All Communities
Viewing all 175326 articles
Browse latest View live

vCenter 6 Hardware status not working

$
0
0

Hello,

 

We have a puzzling issue with 2 of our vCenter appliances.  The hardware tab has no data, or at best shows sensors with no data. (note this is not the same as VMware KB: In the vSphere Web Client in vCenter Server 6.0 the Hardware Status tab reports: No host data available)

 

My dev vCenter appliance started showing this behavior in December.  Worked fine for about 2 months post upgrade from 5.5.   We've had a case with support open since then with no results.

 

This past weekend, we migrated our production hosts to a clean install 6 appliance, and now this appliance is showing the issue.

 

Before the migration to the clean prod install, the hardware status tab was working for host that tested the migration.  This is no longer the case.

 

If I use the fat client and log into a host directly, the hardware status is working.  The issue is with the vCenter appliances themselves. 


Has anyone else ever seen this behavior?


Thank you in advance.


Dashboard openstack unreachable

$
0
0

Hi,

I installed vmware integrated Openstack and when i tried to connected to the dashboard with the Virtual public IP on the browser it sent "the site cannot be reached"

I have three vlans : the first is for the vms 172.29.50.92-->172.29.50.115

                             the seconde for the API 172.29.60.70-->172.29.60.80

                              the third is for the transport

when i try to connect with the virtual IP "https://172.29.60.60" i receive that the site cannot be reached and the adress is not Pingable even the adress of openstack management server 172.29.50.80.

here some screenshots if someone can help me to resolve the problem.

thanks and best regards.

"BANK 6: Not a valid bootbank"

$
0
0

I cloned my old USB stick (with ESXi 6.0 U2 on it) to a new one. When I try to boot, I get the following error, though:

 

"BANK 5: Invalid configuration"
"BANK 6: Not a valid bootbank"

 

(I booted from same USB port, btw)

 

What do those errors even mean?! And how do I get rid of them?

 

Thanks

Error loading /uc_intel.b00

$
0
0

brand new installation of ESXI 6.0 latest build.

no error what so ever at the installation, when i try to boot i get:

 

Error loading /uc_intel.b00

Compressed MD5: 000000000000000000000000(something like that)

Decompressed MD5: 00000000000000000000000000(same, lot of 0)

Fatal error: 8 (Device error)

 

Motherboard: Asus Z10PE-D8

CPU: 2 X Xeon E5-2630 V3

 

i had same configuration just with dual E5-2695 V3 and no problems.

 

thoughts?

resert password root esxi 6.0

$
0
0

Buen dia a todos mi saludos cordiales a cada persona de la comunidad yo soy nuevo en te tema de Vware tengo un server  dell el cual tengo VMware ESXi 6 y no se como resetear el pasword no lo tengoel del user root.

 

Alguein me puede ayudar gracias

ESXi 6 free: Web client

$
0
0

Is the web client available for the free ESXi version?

Regards

marius

app volume and persistent disks

$
0
0

i have a pool Linked clone+persistent disk

now i start use App Volume and have a question

i can use persistent disk + writable volume for uia

or writable volume for uia and profile without Persistent disk

writable volume for profile and persistent disk doesn't work together ?

Any known problems upgrading Windows from 7 to 10?

$
0
0

2 Mac's running Windows 7.

 

Mac OS X 10.10.5 Yosemite

VMWare Fusion 8.1.1

 

Mac OS X 10.11.4 El Capitan

VMWare Fusion 8.1.1


vRO6 Java plugn issue running on vRO7 - array of Properties cannot be accepted

$
0
0

Dear experts,

We have a vRO6 Java plugin accepting an array of Properties() as an input parameters in one of the methods.

On vRO6 plugin Java side an array of Properties used to successfully translate to Hashtable<String, Object>[].

On vRO7 the following exception is thrown:

[2016-05-26 11:15:15.071] [E] Error in (Dynamic Script Module name : findMethodByName#29) Cannot convert org.mozilla.javascript.NativeArray@16758d6c to java.util.Hashtable[]

Could you suggest how to accept an array of Properties on vRO7 Java side ?

Thank a lot in advance,

Alex Pervukhin

Agent_bootstrap fails when deploying CentOS Guest VM but not when manualy rebooting during agent_bootstrap process.

$
0
0

Hello guys and girls,

 

i have been working with Application Services 6.2 for about a month now and all the windows based VM's work like a charm.

however now i am going on to deploying linux based VM's and they fail during the agent_bootstrap process after about 15-16 minutes.

the only time they succeed is when i reboot the VM during the agent_bootstrap process and after the reboot all goes like it should

 

in the agent log there is the following error.

Mon Dec 7 15:19:47 CET 2015 LASTBOOT_TIME: system boot 2015-12-07 14:36

Mon Dec 7 15:19:47 CET 2015 GUGENT_LASTBOOT: system boot 2015-12-07 14:36

Mon Dec 7 15:19:47 CET 2015 System did not reboot after gugent ran.

Mon Dec 7 15:19:57 CET 2015 GUGENT_LASTBOOT file found.

Mon Dec 7 15:19:57 CET 2015 LASTBOOT_TIME: system boot 2015-12-07 14:36

Mon Dec 7 15:19:57 CET 2015 GUGENT_LASTBOOT: system boot 2015-12-07 14:36

Mon Dec 7 15:19:57 CET 2015 System did not reboot after gugent ran.

Mon Dec 7 15:20:07 CET 2015 GUGENT_LASTBOOT file found.

Mon Dec 7 15:20:07 CET 2015 LASTBOOT_TIME: system boot 2015-12-07 14:36

Mon Dec 7 15:20:07 CET 2015 GUGENT_LASTBOOT: system boot 2015-12-07 14:36

Mon Dec 7 15:20:07 CET 2015 System did not reboot after gugent ran.

 

can somebody maybe help me with this problem?

 

p.s. all the agents have been installed with the application services preperation script.

Vrealize OpS Manager Project Help

$
0
0

Hello

 

I am planning to dissolve a cluster in Vcenter and move the existing virtual machines onto another existing cluster.

 

Is there any way to create a project where by i can specify that I want all the VM's in this cluster added to my new cluster and the VROPS tell me if there would be enough capacity to handle the workload?

VMware vSphere PowerCLI 6.0 Release 1 build 2548067 - Get-PowerCLIVersion fails

$
0
0

Just installed the 6.0 version of powercli

 

If I launch PowerCLI as administator (i.e. elevated permissions) all is fine (x64 and x32)

 

If I launch PowerCLI as default user (i.e. Not elevated permissions) not all the modules load

 

"

 

Get-PowerCLIVersion : The term 'Get-PowerCLIVersion' is not recognized as the name of a cmdlet,

 

function, script file, or operable program. Check the spelling of the name, or if a path was

 

included, verify that the path is correct and try again.

 

At C:\Program Files (x86)\VMware\Infrastructure\vSphere

 

PowerCLI\Scripts\Initialize-PowerCLIEnvironment.ps1:38 char:12

 

+ $version = Get-PowerCLIVersion

 

+            ~~~~~~~~~~~~~~~~~~~

 

    + CategoryInfo          : ObjectNotFound: (Get-PowerCLIVersion:String) [], CommandNotFoundExce

 

   ption

 

    + FullyQualifiedErrorId : CommandNotFoundException

 

          Welcome to VMware vSphere PowerCLI!

 

Log in to a vCenter Server or ESX host:              Connect-VIServer

To find out what commands are available, type:       Get-VICommand

 

To show searchable help for all PowerCLI commands:   Get-PowerCLIHelp

 

Once you've connected, display all virtual machines: Get-VM

 

If you need more help, visit the PowerCLI community: Get-PowerCLICommunity

 

      

 

Copyright (C) VMware, Inc. All rights reserved.

 

 

but  none of the powercli commands run

 

and get-module show no vmware modules

 

Is this a new feature? needing to run as admin, previous version i didnt need to run elevated

Anyone else have the same issue?

vSphere Client: USB device stuck at "Connecting..."

$
0
0

Hello.

Normally it works as it should, but sometimes I have trouble connecting a USB flash drive from my client to the VM via vSphere Client. It gets stuck at the connecting stage and I cannot cancel it. If I disconnect it from my computer and reconnect it, it returns to the stuck state.

EsxiUsbConnecting.png

If one is stuck and I try another, it will also get stuck. It can start to work again after a reboot of the VM, but I'm wondering if there is some service or something in ESXi I can check or restart to remedy this.

I usually don't eject the USB flash drive from Windows before disconnecting, as it "disappears" from the computer and I have to unplug/plugin again. Could that contribute to this?

It has happened on both Linux and Windows guests and on several hosts, both 5.0 and 5.1. The client runs in Windows 7 x64.

vRA7 : Display a pull-down menu to select VMware clusters

$
0
0

Hi,

We were using property definitions with property attributes to display a pull-down menu with VMware cluster options for the user to select in the VM request form in vCAC 5.1.

Moving to vRA 7, we are not able to use the property definitions as property attributes cannot be associated with the definitions in this version. Looking for ideas to  incorporate this in vRA 7.

Any help appreciated.

Thanks.

vxlan+blog+1.gif


No "vCenter Support Assistant Has found issues alarms?"

$
0
0

Afternoon, all.  Recently installed latest SA for our v6 environment and got it going.  Ran its first scheduled log gathering successfully over the weekend.  The user's guide indicates it checks for potential issues and if it finds any, it triggers an alarm.  So far, no alarms, no alerts, nothing.  Dumb question, but does that mean my environment is in good shape and there are simply no issues at all?  This thing appears to be working and running, but hasn't said anything about anything.

Read Cache or Write Buffer Cleanup Interval in vSAN 6.0

$
0
0

For how long data remains in the CACHE/Buffer in vSAN 6.0?

Create shortcut to application on mapped networkdrive with spaces in folder

$
0
0

If I create a shortcut with target: K:\Folder name\Folder\Application.exe, the shortcut that is created points to: K:\Folder_name\Folder\Application.exe. Why is it adding underscores when there are spaces? Adding " is not allowed.

vExpert: Michael PERES

$
0
0
This document is a detail page for the VMware vExpert Directory.

Expert Information
NameMichael PERES
LocationNanterre
France
Short DescriptionSoftware Defined and Hyperconverged Solutions
AffiliationPartner
Industry
Website/Bloghttp://vstory.fr
Twitterhttp://www.twitter.com/@peresmike
LinkedIn Profilehttps://www.linkedin.com/m/profile/ACoAAAaWUrsB2aNoGnjY1doKu6ZSQBb9RxY5UKo/
OverviewWriting blog, and I'm pround about my vExpert 2016 status. I'm working at SCC company like Solution Architect Specialist.
Technical CertificationsVMware VCP, Microsoft MCSE, Nutanix NPP
Publications and Speaking Engagementsvstory.fr
User Groups and CommunitiesVmug.fr
Expertise and InterestsVirtualisation, Software Defined Storage, Hyperconverge, Storage, systems, Network.

 


View all vExpert entries

Vsphere 5.5 error installing on windows 8.1

$
0
0

Hello

 

I'm trying to install vsphere 5.5 on a Windows 8.1 laptop and im getting an error J# second edition 3221225485.

 

in the update there is no J# 2.0 present

 

what can i do ?

 

Thanks

Viewing all 175326 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>